EXPERTISE / GUARDRAILS

Bridge guardrails and vehicle restraint systems in Tunisia

BBTP replaces and repairs bridge guardrails and restraint systems: galvanised steel guardrails, BN4 and DBA barriers and their anchorages, for the safety of pedestrians and vehicles.

HOW IT WORKS

Guardrail or restraint system: what is the difference?

A guardrail protects pedestrians: it prevents falls from a bridge footway. A vehicle restraint system, a barrier or safety fence, is designed to hold back a vehicle that loses control and stop it leaving the structure.

Some systems combine both functions. The choice depends on the road carried, the traffic and whether there are pedestrians; it is set by the project owner in line with current standards.

DIAGNOSIS

When should a guardrail be replaced?

A damaged guardrail or barrier no longer protects. These defects are noted during inspections or after a vehicle impact.

  • Bent, torn-off or missing parts after an impact
  • Rusted steel, worn galvanising or paint
  • Loose fixings or base plates
  • Spalled anchorage concrete along the deck edge
  • Equipment no longer compliant with current standards

WHAT WE DO

What we carry out.

01

Guardrails

Installing and replacing galvanised steel guardrails, including tubular ones, along bridge footways.

02

BN4 and DBA barriers

Replacing and repairing barriers on structures, such as the BN4 barriers installed on the Sidi Abdelhamid bridges (Sousse).

03

Anchorages and concrete

Repairing the concrete and fixings that carry guardrails and barriers, for a solid anchorage.

OUR METHOD

Replacement in five steps.

  1. Survey

    Condition of the guardrails, anchorages and concrete; choice of equipment with the project owner.

  2. Making safe

    Site signage and temporary protection for pedestrians and road users.

  3. Removal

    Dismantling the damaged parts and repairing the anchorage concrete where needed.

  4. Installation

    Fitting the new parts, aligned and fixed to their anchorages.

  5. Checks

    Checking alignment, fixings and corrosion protection.

SAFETY AND DURABILITY

Equipment built to last.

On a bridge, guardrails face the weather, sea spray on the coast and impacts. Galvanised steel, suitable fixings and careful installation keep them effective over time.

  • Galvanised steel against corrosion.
  • Equipment compliant with current technical standards.
  • Careful alignment, for safety and the look of the structure.
  • Road users kept protected during the work.

ON SITE

Our guardrail work.

All photos ↗

WHY BBTP

Why entrust your guardrails to BBTP?

01

A speciality

BBTP specialises in bridge maintenance, including replacing and repairing guardrails and BN4 and DBA barriers.

02

Field experience

Work in all 24 Tunisian governorates, notably for the Ministry of Equipment.

03

Passed-on know-how

Crews trained by Mohamed Salah Biri, former head of SOMATRA’s structures department.

FAQ

Guardrails: your questions.

What is the difference between a guardrail and a safety barrier?

A guardrail protects pedestrians from falls. A safety fence or barrier holds back vehicles. On a bridge, both functions are often needed.

When should a bridge guardrail be replaced?

When it has been damaged by an impact, is badly rusted, poorly fixed or no longer meets standards. A damaged guardrail must be made safe without delay.

Why use galvanised steel?

Galvanising coats the steel with a layer of zinc that protects it from rust for many years. By the sea, paint can add to this protection.

Does traffic have to be stopped during the work?

Not necessarily: the work can be done section by section, with suitable signage. Traffic arrangements are agreed with the project owner.

Where do you work?

Throughout Tunisia. BBTP works in all 24 governorates, notably for the Ministry of Equipment.

GUARDRAILS TO REPLACE?

Let’s talk about your structure.

Project owners, design offices, contractors: tell us about the structure and the defects observed, and we will get back to you.

Contact us