EXPERTISE / STRENGTHENING

Strengthening reinforced concrete structures in Tunisia

Bridges, buildings, factories, cement plants: BBTP restores the capacity of reinforced concrete beams, slabs, columns, piers and walls that have weakened or must carry more, with carbon fibre, reinforced concrete jacketing or additional post-tensioning.

WHEN TO STRENGTHEN

When does a structure need strengthening?

The need is established by a diagnosis of the structure and by a design office calculation, which chooses the technique and sets the strengthening to be installed.

  • Corroded reinforcement that has lost part of its section
  • Heavier loads or a change in use of the structure
  • Bending or shear cracks in the beams
  • A design or construction defect to correct
  • Upgrading to more recent codes

OUR TECHNIQUES

Three strengthening techniques.

Before any strengthening, damaged concrete is repaired and corroded reinforcement treated. The design office then chooses the technique: BBTP carries out all three.

Concrete repair ↗
03

Additional post-tensioning

External post-tensioning cables, anchored and deviated on concrete blocks, to strengthen decks.

Additional post-tensioning ↗

OUR METHOD

Strengthening in five steps.

  1. Diagnosis and design

    Survey of the structure and its defects; choice of technique and design of the strengthening by the design office.

  2. Repair of the substrate

    Breaking out damaged concrete, treating corroded reinforcement and rebuilding with mortar before any strengthening.

  3. Installation

    Bonding carbon plates or fabrics, placing and casting the reinforced jacket, or installing post-tensioning cables and their anchor blocks.

  4. Checks

    Checks specific to each technique: carbon bond, cover and casting of the jacket, tensioning of the cables.

  5. Protection and monitoring

    Protection of the strengthening, then monitoring during the periodic inspections of the structure.

ON SITE

Our strengthening work.

All photos ↗

WHY BBTP

Why entrust your strengthening to BBTP?

01

A speciality

BBTP specialises in repairing bridges and strengthening structures: carbon fibre, reinforced concrete jacketing and additional post-tensioning.

02

Field experience

Work in all 24 Tunisian governorates, notably for the Ministry of Equipment.

03

Passed-on know-how

Crews trained by Mohamed Salah Biri, former head of SOMATRA’s structures department.

FAQ

Structural strengthening: your questions.

Do you also work on buildings?

Yes. Beyond bridges and structures, BBTP repairs and strengthens buildings: residential and public buildings, factories, cement plants and industrial sites, with the same techniques.

Which strengthening technique should be used?

It depends on the structure and the forces to be carried, and it is set by the design office: carbon fibre strengthens without adding weight, jacketing suits massive elements and extensive damage, additional post-tensioning strengthens decks.

Who designs the strengthening?

A design office, based on the diagnosis of the structure. Its calculation sets the technique, the quantities and the detailing of the strengthening.

Does the structure have to be closed during the works?

Not necessarily: most strengthening is done under the deck or around the supports. Traffic arrangements are agreed with the design office and the owner.

Where do you work?

In Tunisia, in all 24 governorates, notably for the Ministry of Equipment, and abroad: we consider requests from anywhere in Africa.

A STRUCTURE TO STRENGTHEN?

Let’s talk about your structure.

Project owners, design offices, contractors: tell us about the structure and the defects observed, and we will get back to you.

Contact us