EXPERTISE / BUILDINGS

Building repair and strengthening in Tunisia

Residential and public buildings, factories, cement plants, industrial sites: BBTP repairs deteriorated concrete and strengthens columns, beams, slabs and walls, with the techniques it has used on bridges and structures since 2002.

WARNING SIGNS

When does a building need repair or strengthening?

These defects mean the structure should be examined by a specialist before they compromise its safety.

  • Spalled concrete and exposed or corroded reinforcement
  • Cracks in columns, beams or slabs
  • Slabs that sag or vibrate
  • New loads: machinery, storage, change of use
  • Concrete attacked by moisture, salt, heat or chemicals
  • A design or construction defect to correct

OUR SOLUTIONS

Repair, then strengthen where needed.

Cracks are injected with resin; the choice between jacketing and carbon fibre is made by the design office.

Structural strengthening ↗
01

Repair of deteriorated concrete

Breaking out damaged concrete, treating corroded reinforcement, rebuilding with repair mortar and protecting the surfaces.

Concrete repair ↗
02

Reinforced-concrete jacketing

A new reinforced-concrete casing around columns, beams or walls, to restore their strength and durability.

Reinforced-concrete jacketing ↗
03

Carbon fibre

Plates and fabrics bonded to beams and slabs, column confinement: light strengthening that does not thicken the members.

Carbon fibre strengthening ↗

INDUSTRIAL SITES

Factories and cement plants: heavily loaded structures.

Machine vibration, dust, heat, aggressive products and heavy loads wear out the concrete of industrial sites: columns, beams, slabs and floors crack and their reinforcement corrodes.

We organise the works with the operator (phasing, fenced-off areas, working hours) to keep downtime to a minimum.

OUR METHOD

Our work in five steps.

  1. Inspection and diagnosis

    Survey of the defects, probing and locating corroded reinforcement, to understand what caused the damage.

  2. Design

    Choice of solution and design of the strengthening by a design office.

  3. Repair

    Breaking out, treatment of the reinforcement, rebuilding with mortar and crack injection.

  4. Strengthening

    Reinforced-concrete jacketing or bonded carbon fibre, according to the design calculation.

  5. Checks and protection

    Checks at the end of the works, then protection of the surfaces so that the repair lasts.

ON SITE

The same techniques, on our sites.

Photos from our bridge sites: concrete repair, jacketing and carbon fibre are carried out the same way in buildings.

All photos ↗

FAQ

Buildings: your questions.

Do you also work on buildings?

Yes. Beyond bridges and structures, BBTP repairs and strengthens buildings: residential and public buildings, factories, cement plants and industrial sites, with the same techniques.

Repair or strengthening: what is the difference?

Repair restores damaged concrete and protects the reinforcement. Strengthening increases the capacity of a member, by jacketing or carbon fibre, when it must carry more or has lost part of its strength.

Can you work in a plant that is running?

We organise the works with the operator (phasing, fenced-off areas, working hours) to keep downtime to a minimum.

Who carries out the diagnosis and design?

The diagnosis is based on an inspection of the structure; the strengthening is designed by a design office we work with.

Where do you work?

In Tunisia, in all 24 governorates, notably for the Ministry of Equipment, and abroad: we consider requests from anywhere in Africa.

A BUILDING TO REPAIR?

Let’s talk about your building.

Owners, industrial companies, design offices, contractors: tell us about the building and the defects observed, with photos, and we will get back to you.